Surekleen Brake Kleen 20L - Solvent Brake & Parts Cleaner

Professional Maintenance Positioning

Brake Kleen is designed for the practical demands of automotive, fleet, mining and heavy-equipment maintenance: targeted solvent cleaning, rapid evaporation and a 20L format suited to compatible workshop application equipment.

Suitable operational contexts include: brake servicing, parts cleaning, workshop maintenance, mobile maintenance and heavy-equipment component cleaning.

Directions for Use

1. Ensure the work area is well ventilated and eliminate all ignition sources.
2. Use a compatible solvent applicator or pump sprayer to apply Brake Kleen directly to the affected surface.
3. Allow the solvent to penetrate and lift contamination.
4. Wipe with a clean lint-free cloth or allow the part to air dry.
5. For heavily soiled components, repeat or use light agitation if appropriate.

Important: Do not apply to hot surfaces. Test first before use on rubber, plastic or painted surfaces. Do not use on electrical components while energised.

Technical Information

• Product type: Solvent brake and parts cleaner
• Appearance: Colourless liquid
• Odour: Strong aromatic odour
• Solubility: Insoluble in water
• Specific gravity: 0.67–0.76 g/mL at 20°C
• Flash point: Below 0°C
• VOC content: Approximately 100% v/v
• Pack size: 20 litres
• Dangerous Goods: UN 1268, Class 3, Packing Group II
• Hazchem: 3YE
• Poison schedule: Schedule 5 (Caution)
• Country of manufacture: Australia

Safety Information

Danger: Highly flammable liquid and vapour. May be fatal if swallowed and enters airways. Causes skin irritation. May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. Toxic to aquatic life with long-lasting effects.

Keep away from heat, sparks, flames and hot surfaces. No smoking. Use only outdoors or in a well-ventilated area. Avoid breathing vapour or spray. Wear PPE selected through the workplace risk assessment. Keep the container tightly closed and stored locked up in a cool, well-ventilated place. Avoid release to the environment. Read and follow the current product label and SDS.

Made in Western Australia

Brake Kleen is manufactured by Surekleen in Malaga, Western Australia. Surekleen is an Aboriginal-owned cleaning chemical manufacturer supporting commercial and industrial organisations across Australia.

Frequently Asked Questions

What is Brake Kleen used for?

Brake Kleen is used to remove brake dust, grease, oil and other contaminants from compatible brake components, engine parts and mechanical equipment.

Does Brake Kleen evaporate quickly?

Yes. It is a fast-evaporating solvent cleaner designed to dry without leaving a film when used as directed.

Can Brake Kleen be used on plastic, rubber or painted surfaces?

Compatibility can vary. Avoid contact unless the surface has first been tested in an inconspicuous area and confirmed suitable.

Can it be used on electrical components?

Never use Brake Kleen on energised electrical components. Follow the current label, SDS and workplace isolation procedures.

Is Brake Kleen flammable?

Yes. Brake Kleen is a highly flammable Category 2 liquid and a Class 3 Dangerous Good. Its SDS records a flash point below 0°C.

Is Brake Kleen made in Australia?

Yes. Brake Kleen is manufactured by Surekleen in Malaga, Western Australia.