Closed-Loop Dilution Guide
- Heavy-duty cleaning: set the dispenser to 1:10
- Light cleaning: set the dispenser to 1:20
Spray-Bottle Application
- Fill a properly labelled spray bottle with the pre-diluted solution from the closed-loop dispensing system.
- Spray the prepared Sure Clear solution directly onto the compatible surface.
- Wipe off immediately with a clean lint-free cloth or microfiber towel.
- Buff with a dry microfiber cloth for a clear, streak-free finish.
- Repeat on stubborn marks if required.
Cloth Application
Dispense the pre-diluted solution onto a clean cloth or directly onto a compatible hard surface. Wipe using a smooth circular motion, then dry with a clean microfiber cloth to remove excess residue.
Typical Applications
- Windows and glass partitions
- Mirrors
- Acrylic and plastic surfaces
- Stainless steel and chrome
- Office, retail, education and hospitality facilities
- General commercial touchpoints and reflective hard surfaces
Technical Information
- Form: Clear liquid concentrate
- Colour: Yellow according to the supplied SDS
- Odour: Mild and soapy according to the SDS; marketed as fragrance-free
- pH neat: 10.5–11.0
- Specific gravity: Approximately 1.004
- Pack: 5L closed-loop container
- TDS product code: 1SC4.5CONC-CL
- GHS: Eye Damage/Irritation Category 1
- Hazard statement: Causes serious eye damage
- Transport: Not classified as Dangerous Goods
Safety and First Aid
Keep out of reach of children. Wear protective gloves, protective clothing and eye/face protection when handling the concentrate. Avoid eye and skin contact and avoid breathing vapour, mist or aerosols. If in eyes, rinse cautiously with water for at least 15 minutes, remove contact lenses if easy to do and continue rinsing. Immediately call a Poisons Information Centre or doctor and urgently seek medical assistance. If swallowed, rinse the mouth, do not induce vomiting, give water and seek medical advice.
Storage and Spill Control
Store upright and closed in a cool, dry, well-ventilated place away from direct sunlight, heat, foodstuffs and oxidising agents. Clean spills promptly with suitable PPE, contain runoff and prevent entry to drains or waterways.
Environmental Profile
The supplied TDS describes Sure Clear as solvent-free and formulated with biodegradable surfactants, with no synthetic dyes or preservatives. The SDS does not provide product-level persistence and degradability data, so avoid broad “environmentally safe” or fully biodegradable claims without supporting evidence.
Made in Western Australia
Sure Clear is manufactured by Surekleen in Malaga, Western Australia. Surekleen is an Aboriginal-owned cleaning chemical manufacturer.