Surekleen Gleam 5L Closed Loop - Acid Bathroom Cleaner

Controlled Dosing for Professional Washrooms

Gleam Closed Loop combines a concentrated lactic-acid formulation with sealed, measured dispensing. One 30 mL pump makes a 750 mL bottle at 1:25, supporting repeatable dilution while reducing direct handling of the concentrate.

Cleaning scope: mineral scale, uric-acid deposits, rust, soap scum, body fats, water stains and organic build-up on compatible commercial bathroom surfaces.

Closed Loop Dilution

Dispense one pump - 30 mL concentrate - into 750 mL water, equivalent to a 1:25 dilution. Use the concentrate only through the compatible Surekleen Closed Loop dispensing system.

Directions for Use

Toilets and Urinals

1. Apply diluted Gleam around the toilet bowl or urinal.
2. Allow 5–10 minutes of dwell time.
3. Scrub with a toilet brush and flush.

Showers, Tiled Walls, Baths and Basins

1. Apply diluted Gleam using a cloth, sponge or spray.
2. Allow 2–3 minutes of dwell time.
3. Scrub lightly where required and rinse thoroughly with water.

Surface Compatibility

Suitable surfaces identified in the technical data include stainless steel, porcelain and ceramic fixtures, glazed tiles and compatible grout. Do not use on marble, terrazzo, natural stone or other acid-sensitive surfaces. Always spot test an inconspicuous area first.

Technical Information

• Product type: Lactic-acid toilet and bathroom cleaner concentrate
• System: Surekleen Closed Loop, product number 5
• Appearance: Red liquid
• Odour: Frangipani
• pH neat: Approximately 2.5
• Specific gravity at 20°C: Approximately 1.16
• Pack size: 5 litres
• Product code: 1GC4.5-CL
• GHS classification: Skin Irritation Category 2; Serious Eye Damage Category 1
• Transport classification: Not classified as Dangerous Goods for road, rail, sea or air transport
• Country of manufacture: Australia

Safety Information

Danger: causes serious eye damage and skin irritation. Keep out of reach of children. Avoid breathing mist or spray and avoid skin and eye contact. Wear protective gloves, clothing and eye/face protection selected through the workplace risk assessment. Ensure eyewash facilities are available. If in eyes, rinse cautiously with water for at least 15 minutes, remove contact lenses if easy to do and urgently seek medical assistance. Always follow the current product label and Safety Data Sheet.

Environmental and Disposal Information

The technical data identifies Gleam as biodegradable and phosphate free, while the SDS does not classify it as an acute or chronic aquatic hazard. Prevent discharge to drains and waterways, contain spills and dispose of product and packaging in accordance with local requirements.

Made in Western Australia

Gleam is manufactured by Surekleen in Malaga, Western Australia. Surekleen is an Aboriginal-owned cleaning chemical manufacturer supplying professional organisations across Australia.

Frequently Asked Questions

What is Gleam used for?

Gleam is used for professional cleaning of compatible toilets, urinals, showers, shower screens, baths, basins, stainless-steel fixtures, glazed tiles and grout.

What is the Closed Loop dilution?

Dispense one 30 mL pump into 750 mL water, equivalent to a 1:25 dilution.

How long should Gleam remain on the surface?

Allow 5–10 minutes for toilets and urinals. For showers, tiled walls, baths and basins, allow 2–3 minutes before light scrubbing and thorough rinsing.

Can Gleam be used on natural stone?

No. Do not use Gleam on marble, terrazzo, natural stone or other acid-sensitive surfaces.

Is Gleam biodegradable?

The supplied technical data describes Gleam as biodegradable and phosphate free. The acidic product must still be handled and disposed of responsibly and prevented from entering waterways.

Is Gleam Dangerous Goods?

It is not classified as Dangerous Goods for transport. However, it is GHS hazardous and causes serious eye damage and skin irritation.

Is Gleam made in Australia?

Yes. Gleam is manufactured by Surekleen in Malaga, Western Australia.