Surekleen Lime Disinfectant 5L - General-Purpose Surface Cleaner

Flexible Surface Cleaning for Managed Facilities

Lime Disinfectant supports three documented use patterns: undiluted application to high-touch surfaces, a 30 mL dose in 750 mL water for routine spray-bottle cleaning, and 30 mL per 1 L water for light-duty floors.

Documented application scope: compatible floors, walls, benches and frequently touched hard surfaces in commercial, industrial and domestic settings.

Directions for Use

High-Touch Areas

1. Use undiluted.
2. Apply directly using a suitable spray bottle, cloth or mop.
3. Allow 5–10 minutes contact time.
4. Wipe or rinse if necessary under the approved site procedure.

General Cleaning

1. Dilute 30 mL concentrate into 750 mL water using one Surekleen hand-pump dose.
2. Apply to a compatible hard surface using a sponge or cloth.
3. Allow to air dry or wipe clean.

Light-Duty Floor Cleaning

1. Dilute 30 mL concentrate per 1 L water in a mop bucket.
2. Apply evenly to the compatible floor.
3. Mop as usual and allow to dry. No rinse is required under the supplied TDS directions.

Never mix with other chemicals. Do not use on food-contact surfaces unless a separately approved procedure provides the required rinse and verification.

Technical Information

• Product type: General-purpose hard-surface cleaner/disinfectant
• Appearance: Pale-yellow liquid
• Odour: Lime
• pH neat: 6.5–7.5
• Specific gravity: Approximately 1.01
• Pack size: 5 litres
• Product code: 1LDIS5LTR
• Benzalkonium chloride: Less than 1% according to the SDS
• GHS classification: Not classified as hazardous under Safe Work Australia GHS 7
• Transport classification: Not classified as Dangerous Goods for road, rail, sea or air transport
• Country of manufacture: Australia

Safety Information

The SDS does not classify Lime Disinfectant as GHS hazardous. Nevertheless, avoid eye contact, repeated or prolonged skin contact and breathing vapour, mist or aerosols. Wear gloves and safety glasses as directed by the workplace risk assessment. If in eyes, rinse immediately with water and seek medical advice as a sensible precaution. If skin irritation occurs, rinse with water and seek assistance if symptoms persist. Keep out of reach of children and follow the current label and SDS.

Environmental and Disposal Information

The SDS does not classify the formulation as hazardous for acute or chronic aquatic exposure, but it provides no persistence or degradability data. Prevent entry to drains and waterways, contain spills and dispose of product and packaging according to local requirements. Do not use the absolute claim “environmentally safe”.

Made in Western Australia

Lime Disinfectant is manufactured by Surekleen in Malaga, Western Australia. Surekleen is an Aboriginal-owned cleaning chemical manufacturer supplying professional organisations across Australia.

Frequently Asked Questions

What is Lime Disinfectant used for?

It is intended for general cleaning of compatible floors, walls, benches and frequently touched hard surfaces.

Can it be used undiluted?

Yes. The supplied TDS directs undiluted use on high-touch areas, with 5–10 minutes contact time before wiping or rinsing if necessary.

What is the routine spray-bottle dilution?

Use one 30 mL hand-pump dose in 750 mL water.

Is it suitable for floors?

Yes. For light-duty floor cleaning, use 30 mL concentrate per 1 L water, mop evenly and allow to dry.

Is it non-hazardous?

The SDS does not classify it as hazardous under GHS 7. However, it may still irritate the eyes, skin or respiratory tract if mishandled. Follow the SDS and workplace risk assessment.

Can the website claim it kills viruses or mould?

Only publish virus, fungicidal, mould-kill or other specific biocidal claims after confirming current efficacy testing and any required ARTG listing for this exact product and use pattern.

Is it made in Australia?

Yes. Lime Disinfectant is manufactured by Surekleen in Malaga, Western Australia.