Surekleen Black Jack Bitumen & Tar Remover - 20L

Built for Road Construction and Industrial Maintenance

Targeted Cleaning for Persistent Hydrocarbon Residues

Bitumen and tar can bond strongly to truck bodies, roadwork equipment and hand tools. Black Jack gives maintenance teams a targeted, ready-to-use product for softening these residues before agitation and pressure rinsing.

Operational Value

• Targets contamination that routine detergents may not effectively remove
• Ready-to-use application avoids on-site mixing
• Works across compatible vehicles, equipment, tools and hard surfaces
• Can be reapplied to heavily contaminated areas
• Hot-water pressure rinsing may improve removal performance

Australian Manufacturing with Purpose

Black Jack is manufactured in Malaga, Western Australia, by Surekleen, a 100% Indigenous-owned cleaning chemical manufacturer. Every purchase supports Indigenous manufacturing and the wider impact created through Woollahra Group and Surekleen's procurement model.

Recommended Applications

• Bitumen and tar deposits
• Heavy oily roadwork residues
• Compatible metal truck and vehicle surfaces
• Asphalt paving and road construction tools
• Industrial and earthmoving equipment
• Compatible painted surfaces after spot-testing
• Concrete and compatible hard surfaces

Directions for Use

Always use Black Jack undiluted.

Metal Vehicles, Tools and Equipment

1. Ensure the surface is dry and remove loose debris.
2. Apply directly with a compatible brush, roller or sprayer.
3. Allow at least 15 minutes for the product to soften the deposit.
4. Lightly agitate thick or stubborn deposits if required.
5. Rinse using high-pressure water. Hot water may improve results.
6. Repeat if necessary.

Painted Surfaces

1. Test a small inconspicuous area first.
2. If compatible, apply lightly to the affected area.
3. Allow 10-15 minutes contact time.
4. Rinse with high-pressure water and inspect the finish.
5. Repeat carefully only if necessary.

Concrete and Compatible Hard Surfaces

1. Apply directly to the affected area.
2. Allow 15-20 minutes penetration time.
3. Agitate with a stiff brush if required.
4. Rinse thoroughly using high-pressure water.

Surface Compatibility

Black Jack may affect some painted, plastic, rubber and other non-metallic surfaces. Always spot-test painted or non-metallic materials before use and discontinue if an adverse effect occurs. Avoid unnecessary contact with tyres, seals and plastic components.

Technical Information

Product type: Ready-to-use bitumen and tar remover
Appearance: Clear yellow oily liquid
Odour: Diesel-like
Specific gravity: Approximately 0.89
Solubility: Not soluble in water
pH: Not relevant
Dilution: Use undiluted
Pack size: 20 litres
Product code: 1BJ6
Hazard classification: Eye Damage/Irritation Category 2A
Dangerous Goods classification: Not classified as Dangerous Goods for road, rail, sea or air transport
Country of manufacture: Australia

Environmental Information

An independent assessment dated 5 February 2025 determined that Black Jack contains 100% organic compounds and that all ingredients are readily biodegradable. The assessment concluded that the product's readily biodegradable claim is justified, although the finished product was not tested as a complete formulation.

Do not allow product, dissolved bitumen, spills or wash water to enter drains or waterways. Follow site wastewater and environmental procedures.

Safety and Storage

Warning: Causes serious eye irritation. Wear protective gloves, protective clothing and eye/face protection. Avoid eye contact, repeated or prolonged skin contact, and inhalation of vapour, mist or aerosols. Ensure adequate ventilation.

If in eyes, rinse cautiously with water for several minutes, remove contact lenses if present and easy to do, and continue rinsing. If irritation persists, seek medical advice. Consult the current SDS for complete first-aid instructions.

Store upright in a cool, dry, well-ventilated place out of direct sunlight and away from foodstuffs, heat, ignition sources, oxidising agents and incompatible materials. Keep the container closed when not in use.

Frequently Asked Questions

What is Black Jack used for?

Black Jack is formulated to soften and remove bitumen, tar and heavy-oil deposits from compatible vehicles, roadwork equipment, tools, concrete and other hard surfaces.

Does Black Jack need to be diluted?

No. Black Jack is supplied ready to use and should be applied undiluted.

How long should Black Jack remain on the surface?

Allow at least 15 minutes on metal surfaces, 10-15 minutes on compatible painted surfaces and 15-20 minutes on concrete or hard surfaces. Do not exceed controlled contact times without reassessing compatibility.

Can Black Jack be used on painted surfaces?

Only after spot-testing a small inconspicuous area. If compatible, apply lightly, allow 10-15 minutes, rinse thoroughly and inspect the finish.

Can Black Jack be used on rubber or plastic?

It may adversely affect some rubber, plastic and other non-metallic materials. Avoid these materials unless compatibility has been confirmed through testing.

Should I use hot or cold water for rinsing?

High-pressure water is recommended. Hot water may improve removal of softened bitumen and tar deposits.

Is Black Jack readily biodegradable?

An independent assessment found every ingredient to be readily biodegradable and concluded that the product claim is justified. The complete formulation was not tested as a single finished product.

Is Black Jack hazardous?

Yes. It is classified as Eye Damage/Irritation Category 2A and causes serious eye irritation. Follow the label and current SDS.

Is Black Jack classified as Dangerous Goods?

No. It is not classified as Dangerous Goods for road, rail, sea or air transport.

Is Black Jack made in Australia?

Yes. Black Jack is manufactured by Surekleen in Malaga, Western Australia.