CRC Prime It, 400ml

-CRC Prime It – Red Oxide Primer is a single pack penetrating shop primer with a red-oxide finish and high levels of anti-corrosive zinc complexes. It forms a durable protective coating on steel with excellent anti-corrosive properties. It is formulated for the protection of structural steel and iron and can be applied over clean or lightly rusted surfaces. It does not require immediate overcoating, but can be overcoated at a later stage if desired. Ongoing protection can be achieved through overcoating or simple recoating with CRC Prime It – Red Oxide Primer after 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently. -Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply with smooth even strokes to clean, dry surface holding can approximately 25cm from surface until desired coverage is achieved. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes. -Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes. Long-term protection – Up to 3 years outdoors before overcoating or recoating is necessary, depending on conditions. Scratch resistant, durable – Withstands harsh outdoor conditions. Compatible with most standard decorative paint systems for metals. Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up. Red-oxide finish. Lead and cadmium free.