CRC MS High Performance Adhesive Sealant, Grey, 400g

-CRC MS Sealant is a high performance, one-component neutral curing adhesive sealant based on MS Polymers. It has excellent primerless adhesion to all materials commonly used in the demanding building, construction and engineering industries. It is ideal where silicone sealants are not suitable. CRC MS Sealant is formulated for durable bonding, sealing and waterproofing gaps in dilation joints. This innovative product cures quickly in ambient temperatures and retains excellent bond strength, elasticity and tear resistance over the years. It skins over in a short time resisting dust and dirt pickup and can be applied in thick layers without shrinking or bubbling. CRC MS Sealant will not stain and is compatible with commonly used paint systems. It will not crack or show signs of aging when exposed to adverse weather conditions and harsh UV radiation. It does not contain solvents, isocyanates and silicones. -Cut the cartridge at the top and screw on the nozzle which has to be cut according to the width of the joint. Apply sealant as evenly as possible. During work interruption release the handle on the gun and pull the piston back. When finished, level the sealant with an appropriate instrument or a well soaped finger. Remove masking tape before the sealant starts to harden. -Excellent adhesion strength – To a wide range of substrates commonly used in the building, construction and engineering industries Waterproofs, bonds and seals – Wide variety of applications, one product does it all. Paintable – Cured product can be painted with most solvent and water based paints and varnishes Extreme flexibility – Excellent mechanical properties over a wide temperature range for use in dilation joints Will not crack – No cracks and no signs of aging Interior and exterior use Low VOC, low odour – Contains no solvents or isocyanates UV Resistant - Resistant to adverse weather conditions and UV exposure Durability – Excellent bond strength, tear resistance and elasticity is maintained over time, even years after application. Non-slump – Suitable for vertical joints Extreme low shrinkage – Less than 1%, allows application in thick layers Non-bubbling – The surface stays smooth and intact Non-staining Primerless one-component product – Convenient and time saving on construction sites Cures fast – For increased productivity Skins over in a short time – To resist dirt and dust pickup Easy handling – Can be extruded from cartridges with a low force even in low temperatures Totally chemically neutral Good chemical resistance – To water, mild solvents, mineral oils, fat, low concentration anorganic acids and bases Easy clean up – Just wipe up any excess uncured product with a wet cloth Use on most substrates – PVC, concrete, brick, timber, glass, aluminium, iron, steel, stainless steel, copper, ceramic, plywood, many of the newly developed materials for construction, fiberglass, various plastics Contains no solvents or isocyanates